3-Chamber Pillow with Down Filling
Color Off-White
Weaving Microfibre.
Filling: White Polish Goose Down
Material 75% polyester/25% nylon
Closure Sewing
Standard size in cm
Standard: 50 x 75 cm
King: 50 x 90 cm
Goose down fill: Standard Size Pillow (50 cm x 75 cm):
Semi Firm Filling: 100 g goose down + 420 g semi goose down
Firm Filling: 100 g goose down + 470 g semi goose down
Extra Firm Filling: 100 g goose down + 520 g semi goose down
Product safety
AllerGuard products are classified as Medical Devices by the British GMDN Agency, the Danish Medicines Agency and EURAMED.
Washing instructions
AllerGuard withstands washing up to 60 °C.
Also avoid filling the washing machine completely. Max. 80%. This way you give the bedding optimal conditions to be washed thoroughly and hygienically clean.
All our pillows can be tumble dried. (select 600-800 rpm to reduce creasing)
We recommend air drying.
When tumble drying, we recommend that you select “iron dry” and let the cover air dry to remove any remaining moisture. This will reduce wrinkling and shrinkage.
Dry the pillow thoroughly: Tumble dry the pillow on low heat. Use dryer balls or tennis balls to prevent the filling from clumping.
Make sure the pillow is completely dry to avoid mold and bad odors. Repeat the drying process if necessary.
The warranty is void if you use optical brighteners, bleach or fabric softeners.
If necessary, use stain remover before washing.
Use the right detergent: Use a detergent that is suitable for delicate materials, such as down or silk.
AllerGuard® allergen-protective covers are made of microfibre fabric that prevents dust particles as small as 0.5 microns (μ) from penetrating the cover. This significantly reduces contact with house dust mite allergens, which are on average 1-3 microns and are often found in mattresses, duvets and pillows.
At the same time, the surface structure and air and water vapour permeability of the AllerGuard® fabric ensure that the health aspects and hygiene are not reduced.
Application
Used in cases of confirmed or suspected house dust mite allergy, which leads to symptoms such as difficulty breathing, runny nose, eczema; or if a general improvement of the indoor climate in the bedroom is simply desired by reducing the dust load in the air.
Seek advice from your doctor or AllerGuard if you are in doubt.
Use Precautions and Maintenance
The performance of the allergen-protective cover depends to a large extent on the ability to retain (dust) particles, and the covers should not be too tight, as this increases the pressure load which could theoretically push allergen particles through the fabric, stitching or zipper.
Avoid sharp objects or other objects that could damage the surface, seams or zippers.
Never place the pillow near strong heat sources (90°C or hotter) or in UV rays (sunlight) for too long periods at a time, as this can shorten the life of the cover.
The AllerGuard® pillow does not require any special maintenance to maintain the allergen-protective function, but is washable in a normal household machine at 40-60°C for general hygiene.
The cover’s microfibre means that it air-drys quickly after washing. For even faster drying, you can use a tumble dryer set to low to medium heat.
If you are very allergic to dust/house dust mites, it is recommended to use a dust mask when removing and installing the pillow to avoid contact with dust particles that can be stirred up from the mattress.
Renew your pillow when and if critical defects, such as holes or visible wear, occur due to accidents or improper use. Such defects will reduce protection against allergens.
It is recommended to use AllerGuard® pillows on both mattresses and all duvets and pillows, as otherwise the overall effect may be impaired.
Side Effects
There are no health risks or other side effects associated with the use of AllerGuard® allergen-protective covers, as they comply with the standards for normal bedding comfort.
Guarantee
AllerGuard® allergen-protective covers are covered by the manufacturer’s warranty against material and manufacturing defects. The manufacturer provides a 10-year warranty on all products.
AllerGuard® guarantees that the product in its unopened state is free of allergens, as it is packaged in an allergen-free environment. Therefore, the product will not be returned without further agreement.
3-CHAMBER PILLOW WITH DOWN FILLING
Color Off-White
Weaving Microfiber.
Filling: White Polish Goose Down
Material 75% polyester/25% nylon
Closure Sewing
Standard size in cm
Standard: 50 x 75 cm
King: 50 x 90 cm
Custom sizes on request
Goose down fill: Standard Size Pillow (50 cm x 75 cm):
Semi Firm Filling: 100 g goose down + 420 g semi goose down
Firm Filling: 100 g goose down + 470 g semi goose down
Extra Firm Filling: 100 g goose down + 520 g semi goose down
Product safety
AllerGuard products are classified as Medical Devices by the British GMDN Agency, the Danish Medicines Agency and EURAMED.
Washing instructions
AllerGuard withstands washing up to 60 °C.
Also avoid filling the washing machine completely. Max. 80%. This way you give the bedding optimal conditions to be washed thoroughly and hygienically clean.
All our pillows can be tumble dried. (select 600-800 rpm to reduce creasing)
We recommend air drying.
When tumble drying, we recommend that you select “iron dry” and let the cover air dry to remove any remaining moisture. This will reduce wrinkling and shrinkage.
Dry the pillow thoroughly: Tumble dry the pillow on low heat. Use dryer balls or tennis balls to prevent the filling from clumping.
Make sure the pillow is completely dry to avoid mold and bad odors. Repeat the drying process if necessary.
The warranty is void if you use optical brighteners, bleach or fabric softeners.
If necessary, use stain remover before washing.
Use the right detergent: Use a detergent that is suitable for delicate materials, such as down or silk.
AllerGuard® allergen-protective covers are made of microfiber fabric that prevents dust particles as small as 0.5 microns (μ) from penetrating the cover. This significantly reduces contact with house dust mite allergens, which are on average 1-3 microns and are often found in mattresses, duvets and pillows.
At the same time, the surface structure and air and water vapor permeability of the AllerGuard® fabric ensure that the health aspects and hygiene are not reduced.
APPLICATION
Used in cases of confirmed or suspected house dust mite allergy, which leads to symptoms such as difficulty breathing, runny nose, eczema; or if a general improvement of the indoor climate in the bedroom is simply desired by reducing the dust load in the air.
Seek advice from your doctor or AllerGuard if you are in doubt.
USE, PRECAUTIONS AND MAINTENANCE
The performance of the allergen-protective cover depends to a large extent on the ability to retain (dust) particles, and the covers should not be too tight, as this increases the pressure load which could theoretically push allergen particles through the fabric, stitching or zipper.
Avoid sharp objects or other objects that could damage the surface, seams or zippers.
Never place the pillow near strong heat sources (90°C or hotter) or in UV rays (sunlight) for too long periods at a time, as this can shorten the life of the cover.
The AllerGuard® pillow does not require any special maintenance to maintain the allergen-protective function, but is washable in a normal household machine at 40-60°C for general hygiene.
The cover’s microfiber means that it air-drys quickly after washing. For even faster drying, you can use a tumble dryer set to low to medium heat.
If you are very allergic to dust/house dust mites, it is recommended to use a dust mask when removing and installing the pillow to avoid contact with dust particles that can be stirred up from the mattress.
Renew your pillow when and if critical defects, such as holes or visible wear, occur due to accidents or improper use. Such defects will reduce protection against allergens.
It is recommended to use AllerGuard® pillows on both mattresses and all duvets and pillows, as otherwise the overall effect may be impaired.
SIDE EFFECTS
There are no health risks or other side effects associated with the use of AllerGuard® allergen-protective covers, as they comply with the standards for normal bedding comfort.
GUARANTEE
AllerGuard® allergen-protective covers are covered by the manufacturer’s warranty against material and manufacturing defects. The manufacturer provides a 10-year warranty on all products.
AllerGuard® guarantees that the product in its unopened state is free of allergens, as it is packaged in an allergen-free environment. Therefore, the product will not be returned without further agreement.